Skip to Content

How Does the Positively No-Pull Harness Work?

Jack Russell Terrier pulling against lead walking on a street

Does your dog like to pull on his/her lead during walks? If your answer is YES, it is quite likely that you are considering to get a no-pull harness for your pup. It minimizes the dog’s ability to tug hard on the leash because of its specific design.

In traditional harnesses, the clip is on the back that allows the canine to pull strongly. On the other hand, the clip of a non-pull harness is at the front. This limits the dog’s pulling ability because the clip is nearer to the canine’s center of gravity (chest).

The Positively No-Pull Harness is an extremely effective tool to prevent leash-pulling. The specialized design of this harness ensures that it doesn’t cause any pain or discomfort to the dog. It comes in several different sizes and can be used in multiple configurations for training and walking purposes. Keep reading to know all the details about this amazing product.

Salient Features of Positively No-Pull Harness

Positively No-Pull Harness Product image

A lot of thought has gone into the design of this harness to ensure the best possible experience for both parties. Whether you talk about utility, effectiveness, or comfort, the Positively No-Pull Harness meets all the expectations. The following are some of the key features that make it one of the best harnesses in that market.  

  • Double front connections (one on each side) to maximize no-pull effectiveness.
  • 4 adjustment points to ensure proper fitting for dogs of all sizes and shapes.
  • A velvet underarm strap to prevent chaffing.
  • Traditional back connection to use it as a standard harness (recommended only if your dog is trained).

How to Use the Positively No-Pull Harness?

Do you want know how to use this amazing product? Keep reading to know all the details about this No-pull Harness.

Putting the Harness On

The very first thing that you need to do is to put the harness on your dog. For this purpose, use the purple strap as your guide because it will go over the head of your pup. Start by disengaging the two connection clips (one on each side) and put the harness over your companion’s head. Pass the bottom straps through the front legs of your dog and connect them to the corresponding connection clip.

Attach a Leash

Once you have put the harness on your dog, it’s time to attach a lead. For this purpose, there are two chest connections that provide the maximum no-pull action. In most of the other no-pull harnesses, there is only one front connection. This allows the harness to slide to a side when the dog pulls while walking.

In contrast to that, the two front connections of the Positively No-Pull Harness keeps the loop on the chest. Therefore, the dog finds it harder to pull because the harness always stays close to his/her center of gravity.

Simply connect the leash to the furthest chest connection from you to maximize the effectiveness of this harness. This means that if you are going to walk on the right-hand side of your pup, the leash should be connected to the left connection. Alternatively, connect the lead to the right connection and walk on the left-hand side of your dog. This will make sure that you don’t lose the no-pull action of the harness.

Different Configurations of this Harness

There are quite a few methods to use the Positively No-Pull Harness. The most suitable technique is dependent on your dog’s level of training and the goal you want to achieve. The following are all the configurations that can be successfully executed with this harness.

3.5-Foot Leash with a Floating Handle

For this method, connect one clip of the lead to the furthest (from you) front connections. Similarly, attach the other clip to the back connection. This will give you a double-leash to control from both points. It is the most recommended configuration to use this harness.

Regular Collar Walk with Backup No-pull Action

In this technique, we connect one clip of the lead to the dog’s collar. Once again, the second clip is attached to one of the front connections. This offers you the liberty of using the no-pull action while walking your canine on a regular collar.  

5-Foot Leash for Trained Dogs

For this configuration, attach one clip of the leash to the back connection of the harness. Clip the other end of the lead to its floating handle to form a 5-foot leash. This is a comfortable approach to walk your dog from the back. However, it is only recommended for trained dogs who don’t pull.

3.5-Foot Leash for Close Control

This method is ideal for those owners who want to have close control over their canine companion. Connect both clips of the lead to the back connection of the harness to get this 3.5-foot leash. In case you are worrying, this configuration doesn’t put any strain on your dog’s spine.

Positively No-Pull Harness Size Chart

SizeChest (Inches)Weight (Pounds)Suitable Breeds
Small18-2420-35Beagle, Boston Terrier, Corgi, etc.
Medium22-2835-50Australian Shepherd, Saluki, etc.
Large26-3245-85Boxer, German Shepherd, Labrador, etc.
X-Large30-3880-135Alaskan Malamute, Rottweiler, etc.
XX-Large36-44130-200Great Dane, Newfoundland, etc.

Please keep in mind that we may receive a small commission when you click our links and make purchases and as an Amazon Associate, this site earns from qualifying purchases. However, this does not impact our reviews and comparisons. We try our best to keep things fair and balanced, in order to help you make the best choice for you.